Vortex Tubes and Industrial Spot Cooling

Vortex Tubes are an effective, low-cost solution to a wide variety of industrial spot and process cooling needs. They cool compressed air even to -46C temperature.

Vortex Tubes and Industrial Spot Cooling 

Showing 1 - 6 of 6 items
  • Product Overview Nex Flow Frigid-X series Cabinet Enclosure Cooler for electronic control panels provides a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Our Cabinet Enclosure Coolers are compact and can be installed in minutes...

  • There are three standard sizes for the basic Frigid-X vortex tubes – the mini size which uses 2, 4 or 8 SCFM, the most common (medium) size which uses 10, 15, 25, 30 and 40 SCFM, and the large sizes which use 50, 75, 100 and 150 SCFM.  The large sizes are used in heavy industry but can cool to over 10,000 BTU/hr.  Vortex tubes normally come with the “hot...

  • Produce cold air as low as minus 30 ºF (minus 34 ºC) from compressed air to spot cool with easy adjustability. Engineer DWGS  Price list

  • The Frigid-X Mini Spot Cooler is a low cost and maintenance free system which utilizes a vortex tube to produce cold air at one end. It is quiet and compact.Designed for small parts, the Frigid-X™ Mini Spot Cooler produces a stream of 15 to 20 degree F (minus 9.5 to 7 degree C) of cold air to prevent heat buildup depending in inlet air temperature. It can...

  • When lubrication is required as well as cooling, lubricating mist can be reduced and cooling enhanced.Heavy coolant can be messy, costly and must be carefully maintained. In addition, dry machining is not always possible due to the need for lubrication or additional cooling that cold air alone cannot provide. The unique patent pending low cost Frigid-X...

  • Frigid-X Single Point Tool Cooling System for dry machining applications - replaces polluting and often toxic mist systems to improve dry machining operations. No mess, no residue and low in cost. It is efficient and can improve dry machining operations and assist in spot cooling applications for a variety of industrial machining processes but increasing...

Showing 1 - 6 of 6 items