Description
The single output cooling tube model can be used when centralized cooling is desired, for example in drilling or grinding. The dual output cooling tube model is suitable for applications where cooling is required over a wider area, for example in band sawing, turning or hot gluing. The cooling tubes can be easily adjusted, removed or replaced. For most applications, the 322 W model AIR-MTC15 is sufficient, but for harder materials or higher machining speeds, a more powerful model may be required. Our technical support can assist you in choosing the right cooling power tool cooler.
| REFERENCE | DESCRIPTION | AIR CONSUMPTION (7 bar) |
|---|---|---|
| AIR-MTC15 | Tool Cooler 322 W | 425 Nl/min |
| AIR-MTC25 | Tool Cooler 527 W | 708 Nl/min |
| AIR-MTC30 | Tool Cooler 615 W | 850 Nl/min |
| AIR-MTC40 | Tool Cooler 849 W | 1133 Nl/min |
| AIR-MLLL | Hose Kit with one outlet | – |
| AIR-MLLD | Hose Kit with two outlets | – |
